SiO Controller
SUS Corporation
3-1
3. Functions
3.1 Part Names and Functions
This section describes the part names, functions, and applications of SiO controllers
(SiO2/SiO2PNP/SiO3/SiO-N1/SiO3.2/SiOt/SiO-N3/SiO-N3PNP).
3.1.1 SiO2/SiO2PNP
No.
Part
Function
(1)
Power connector
Connect an AC adapter here to supply 24 V DC.
* Do not supply power from other connectors.
(2)
Power LED (green)
Lights when the power is ON.
(3)
RUN switch
Set this to RUN (right) to execute the program.
(4)
RUN LED (green)
Lights during RUN.
(5)
Input connectors
A connector used for input (e-CON (4-pole)
×
6 inputs)
(6)
Output connectors
A connector used for output (e-CON (3-pole)
×
4 outputs)
(7)
IN LED (red)
Lights when the input signal is ON (I1 to I6).
(8)
OUT LED (green)
Lights when the output signal is ON (O1 to O4).
(9)
USB connector
Connect the USB cable here (Micro-B USB 2.0).
(10)
T1
Sets Timer 1.
(11)
T2
Sets Timer 2.
(12)
Ground terminal
Connect this to the earth using an M3
×
4 screw.
(13)
AL LED (red)
Not used
(14)
GF mount hook
A hook for installation on a GF (N) rail.
(2)
(10)
(12)
(9)
(3) (4)
(13)
(11)
(7)
(5)
(6)
(8)
(1)
Version label
* The same applies
to SiO2PNP.
(14)