Survision Micropak 3, Руководство по установке и настройке

Страница: 5 / 31

1.2 - General installation rules
Long plates Small plates*
Sensor
Minimum
distance**
Maximum
distance
Max. width
of lane
covered
Minimum
distance
Maximum
distance
Max. width lane
covered
NANOPAK 3 2m/6.56 ft 8m/26.25 ft 4m/13.12 ft 2m/6.56 ft 5m/16.40 ft 2,6m/8.53 ft
MICROPAK 3
12mm
4m/13.12 ft 7.5m/23ft 4m/13.12 ft 3m/9.84 ft 5,5m/18.04 ft 2,6m/8.53 ft
MICROPAK 3
16mm
5m/16.40 ft 10m/ 32.81 ft 4m/13.12 ft 4m/13.12 ft 7,5m/24.61 ft 2,6m/8.53 ft
MICROPAK 3
25mm
8.5m/26.25 ft 15m/49.21 ft 4m/13.12 ft 7m/22.07 ft 10m/32.81 ft 2,6m/8.53 ft
VISIPAK 4 3m/9.84 ft 40m/131.23 ft 7m/22.97 ft 3m/9.84 ft 25m/82.02 ft 4,5m/14.76 ft
* Value for small plates including (not exclusively) the United States, Canada, Mexico, Belgium, Monaco & South America..
** Distance between the camera and the point where we want the plate to be read
Angle restrictions
The total sum of the vertical angle and the horizontal angle (the angle formed between the
roadside and the camera aiming line) should not exceed 30°.
The camera must point at least slightly vertically downwards to prevent direct illumination
from the sun.
Distance*
Height/max posible
side adjustment for 30°
2m/6.56 ft 1m/3.28 ft
5m/16.4 ft 2,5m/8.2 ft
10m/32.81 ft 5m/16.4 ft
15m/49.21 ft 7,5m/24.61 ft
20m/65.62 ft and over 10m/32.81 ft
* Distance between the camera and the point
where we want the plate to be read
5
The field of vision should be clear of all obstacles:
- Barrier line (horizontal bar)
- Pedestrian crossing in front of camera
- Vehicule crossing in front of camera
Distance restrictions
The SURVISION cameras can read from both front and rear, i.e. :
• The NANOPAK can be installed in a barrier column or in a Totem.
• The MICROPAK and the VISIPAK can be installed on a pole, on a wall,
on a ceiling or on a gantry.
1.1 - Possible installation locations