iControl Manual
11
Control
The Control panel provides the clickable buttons to change the status
of one or more outlets. Once one or more outlets have been selected,
click on the On, Off, or Cycle button. Cycle will perform a timed
change in outlet state; either Reboot (On-Off-On), or Cycle (Off-On-
Off), depending on the current state of the outlet.
The Cycle timer box allows specification of the length, in seconds, of
all cycle or reboot operations. Entries of 1 to 99 seconds are valid.
The Delay timer box allows specification of the delay time, in
seconds, between the powering on of each outlet whenever more than
one outlet is turned on from the same command. This can be used to
prevent over-current draw on initial power up of devices. Entries of 0
to 99 seconds are valid.
The Select All and Select None buttons allow selection or
de-selection of all outlets.
Refresh provides an update of the status page to display current
conditions. Web pages are static moments in time, so use the Refresh
button to obtain the latest status.
Logout terminates the session.
Status
The Status window displays the current view, controllable outlets, or other outlet information.
Buttons in the header select the current view.
Device View
The Device View displays the status
of a single device. It shows the
current status of each outlet of the
device, and allows selection of one or
more outlets for control. It also
displays the line voltage, total current
draw, and any alarms.
Use the checkboxes to select or
de-select any outlet for control.
