Sureshot Dispensing Systems AC-VP1, Руководство по эксплуатации

Страница: 5 / 32

5
ELECTRICAL REQUIREMENTS
Make sure the current at the power source receptacle is: 120 VAC, 1 ph, 3 Amp, 60 Hz.
The power cord is furnished with a UL-approved 3-prong attachment plug. This plug is
designed to fit a receptacle with provisions for a grounding stud. The dispenser includes
a microcontroller and must be operated on grounded electrical wiring at all times. Failure
to do so will void the Warranty.
SERVICING - ELECTRICAL
Electrical servicing must be carried out by a qualified technician.
The Warranty will be null and void if the dispenser is serviced by unqualified personnel.
Service under Warranty must be approved and dispatched by A. C. Dispensing
Equipment Inc. before the service technician is dispatched. If you need assistance, call
the SureShot Dispensing Systems® Technical Assistance Center at 1-888-777-9990 or
1-902-865-9602.
SERVICING - REFRIGERATION
The temperature is set at the factory to maintain products within the range of 32°F to
40°F (0°C to 4.4°C).
Any servicing of the refrigeration system must be carried out by a qualified technician.
The Warranty will be null and void if the refrigeration system is serviced by unqualified
personnel. Service under Warranty must be approved and dispatched by A. C.
Dispensing Equipment Inc. before the service technician is dispatched. If you need
assistance, call the SureShot Dispensing Systems® Technical Assistance Center at
1-888-777-9990 or 1-902-865-9602.
INSPECTION FOR DAMAGE
When you receive the dispenser, inspect the exterior of the shipping container for
damage. Note any damage in detail.
Uncrate the dispenser at once. See instructions on page 6. Examine the dispenser for
damage. Report any damage to the transportation company immediately. File a claim for
damages promptly.
Your immediate inspection protects you against loss since A. C. Dispensing Equipment
Inc. is not responsible for damages incurred during shipment.
Notify A.C. Dispensing Equipment Inc. No returns will be accepted without prior approval.
Obtain an authorized return number by contacting SureShot Dispensing Systems®
Technical Assistance Center at 1-888-777-9990 or 1-902-865-9602.
RESHIPMENT
Packaging for re-shipment is done in the reverse order of uncrating. If packaging is not
available, it can be purchased locally, or from our factory by request.
Any damage occurring in transit of the returned goods caused by improper packaging is
not considered a defect covered by Warranty.