Key Features
1-1
1-2
Package Contents
1. Introduction
1.4/5/8 x 10/100/1000Mbps Auto-negotiation Ethernet ports
2.Auto MDI/MDI-X for each port
3.Support Full/Half duplex transfer mode for 10/100Mbps
4.Support Full duplex transfer mode for 1000Mbps
5.Wire speed reception and transmission
6.Store-and-Forward switching method
7.IEEE 802.3x flow control for full-duplex
8. 2M bits shared data memory buffering
9.Integrated address Look-Up Engine, supports 8K absolute
MAC addresses
10.Back pressure flow control for half-duplex
11.Support 4/5/8 port-based VLAN.
12.Four Classes of Service (COS) selectable per port basis and/or checked via IP
Header and 802.1Q VLAN Tag.
13.Support Port Mirroring.
14.Support one Trunk function for 808CG-S
Performance Highlights
This users guide is applied to the 4/5/8 port 10/100/1000M Gigabit Ethernet Desktop Smart
Switch. The 4/5/8 port 10/100/1000M Gigabit Ethernet Desktop Smart Switch is designed for
easy installation and high performance in an environment where traffic on the network
and the number of users increase continuously. Small businesses and corporate branch
offices can now take full advantage of 1000Mbps Gigabit Ethernet performance and pre-
serve existing desktop investment with no changes required to PCs, NICs, cabling, drivers,
or PC configurations.
One 4/5/8 port 10/100/1000M Gigabit Ethernet Desktop Smart Switch
One Pack of screws
One Power Cord
One Users Guide
One RS-232 D-SUB Cable
Note:If any item is damaged or missing, please contact your supplier.
Store-and-forward switching scheme capability to support rate adaptation and ensures
data integrity
Auto-negotiation on each port.
Auto-polarity detection for correction of incorrect polarity on the received pairs in
1000BASE-T and 10BASE-T.
Data forwarding rate 1488000 pps per port at 100% of wire-speed
Data filtering rate eliminates all error packets, runts, etc. at 1488000 pps per port at 100%
of wire-speed
The shortest forwarding latency time
