SureCall, Inc | 1-888-365-6283 | [email protected] | www.surecall.com
9
Installation
Yagi Antenna Assembly
Nut
Washer
U-bolt
Bracket
Drip Hole
RG6 Cable
Outside
Antenna
Yagi Antenna Install Illustration
Caution: Do Not aim a directional antenna towards another antenna
OK
Aiming Directional
Antennas
Option B: Outside Yagi Antenna
Before installing a Yagi, or directional antenna, note that the antenna should be mounted on a pole or pipe (not
provided), at the highest possible location above the roofline – at least 25 ft above the indoor antenna – aimed
in the direction of your nearest cell tower. To find the location of your
carrier’s closest cell tower, go to www.antennasearch.com.
Ensure that the mounting area has at least a 3 ft radius clear of
obstructions, other radiating elements and metal objects such as pipes or
metal siding and orient the antenna with the drip hole at the bottom.
Once you have identified your install location, assemble the u-bolt, bracket,
nuts and washers onto a pole (available separately) as shown in the illustration. Keep the connections loose
enough to allow the antenna to rotate until the optimum direction is found.
Once the outside antenna is secured to a pipe or pole, connect antenna to one end of the provided RG6 cable
and tighten the connection. Run the cable along route to planned location of your booster.
