SureCall, Inc | 1-888-365-6283 | [email protected] | www.surecall.com
SureCall, Inc | 1-888-365-6283 | [email protected] | www.surecall.com
10
Installation
Step 3. Install the Booster and Inside Antenna.
Choose a location for the booster and inside antenna that is near a working outlet and at least 25 Ft from the
outside antenna. Consider the below factors affecting booster performance.
1. Signal strength at the location of the outside antenna.
2. Interior building materials between the inside antenna and your mobile device.
3. Distance between the outside antenna and inside antenna (minimum 25 ft. separation)
Note: This booster should not be used near open fire or flame. Storage and transportation: Store and place in non-extreme room-temperature and dry environment.
Option A:
Whip Antenna
Option B:
Panel Antenna
Option A: Whip Antenna
Place the booster in a central location where signal is needed. When placing the booster, note that further
separation between the booster and outside antenna will increase booster performance. Connect the whip
antenna to the booster connector labeled INSIDE.
Whether you choose to mount the booster on a wall or set on a shelf, note that the antenna should be vertical.
Option B: Panel Antenna
SureCall’s Inside panel antennas are directional with a 120˚ reach. They
should be mounted facing the area signal is needed and away from the
outdoor antenna (See “Aiming Directional Antennas” on page 6).
Mount on a vertical surface that is the approximate height of normal cell
phone use. The antenna may be concealed behind a wall provided there are
no materials that could obstruct signals.
Besides the antenna itself, parts include mounting equipment for a flat
horizontal surface.
1. Using plate, mark position of desired screw placement.
2. Screw mounting plate into place with the slide panel protruding towards
you.
3. Slide antenna securely onto mounting plate.
Mounting
Plate
Screws
SC-240
