SureCall Fusion2Go OTR
www.SureCall.com | 1-888-365-6283 | [email protected]
5
32 in.
height
16 in.
height
Before Installation
Select a location on your vehicle for the outside antenna. Multiple placement and height
configurations are available to achieve the best configuration for your specific vehicle needs.
The antenna can be mounted on any truck, with or without an existing antenna mounting
point. For vehicles without built-in mounting points, the antenna uses a 3/8 x 24 thread
mount designed to accommodate many available 3rd party CB mounts.
A 2-clamp mounting bracket is provided for use on a mirror rail or other existing vehicle rails.
Additionally, an extension pole is also provided. Note, it is needed only to achieve the
clearance requirements for the antenna specified below.
Thread glue is provided with the antenna. It should be applied at each threaded connection
only after you have confirmed the proper height configuration as the glue will make the
connection permanent.
Keep in mind, the antenna mounting location should:
(a) allow the antenna to extend above the metal cab (b) be at least 6 inches away from
any windows (c) provide at least a 12-inch radius clear of obstructions and other radiating
elements, such as a radio antenna.
Truck antenna
Cable
Mast extension
(optional)
Cable exit
adapter
Spring base
A “soft installation” should first be performed by assembling the truck antenna (WITHOUT
GLUE) and routing the cable through an open window. After completing the remaining
installation steps and successful operation is verified, proceed with permanent installation.
