SureCall Fusion Professional 2.0 | Installation
1-888-365-6283 | [email protected] | www.surecall.com/ca
16
16
Panel-antenna installation
Panel installation
Besides the antenna itself, parts include mounting
equipment for a flat horizontal surface
Install the panel antenna as shown in the illustration.
1. Using the plate, mark the position of desired screw
placement.
2. Screw the mounting plate into place with the slide
panel protruding towards you.
3. Slide antenna onto mounting plate.
Amplifier
Place the amplifier near a working AC outlet and within
range of the provided 20 ft cable. The amplifier may
be placed on a flat surface or mounted to a wall using
mounting tabs.
NOTE:
Do not power on until the system is fully connected.
Cable
Connect the amplifier to the panel antenna using the 20 ft.
of cable. Connect the antenna to the port marked “INSIDE”.
Next, locate and connect the open end of the 50 ft cable
from the outside antenna to the amplifier port marked
“OUTSIDE”.
See page "Cable guidelines" on page 12 for more
information.
Screws
Antenna
Mounting plate
Bracket
Inside Cable
Connecting inside panel antenna to Fusion
Professional 2.0 amplifier
To outside antenna
English