SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | [email protected]
5
1.4 - How It Works
The Force3 PSB BDA amplifies signals from the nearest radio tower to a building and from those radios
back to the tower to compensate for weak reception caused by distance, topography, building
structure etc. The BDA receives the signal from an outside antenna, amplifies that signal, and then
rebroadcasts it via the interior antenna(s) where it is picked up by radios. The interior antennas also pick
up signals from radio devices and pass them to the BDA. The BDA amplifies these signals and passes them
to the exterior antenna for rebroadcast back to the tower.
CHAPTER 2: Safety
This chapter contains important safety information designed to prevent personal
injury, equipment malfunction, and/or radio interference. You are responsible for
ensuring a safe installation.
2.1 - Safety Warnings
• You are responsible for knowing and following all applicable codes and regulations and for obtaining all
required permits and inspections.
• Follow all safety precautions contained in this Installation Manual.
• The installation process may require working in high locations such as roofs and/or ladders. Follow ap
-
plicable safety regulations and best practices to avoid falling. Take care not to drop objects off any high
area. Cordon off ground areas directly below roof or ladder work when possible.
• Always use appropriate personal protective equipment such as goggles, gloves, hard hat, etc. as needed
and as required.
Safety
WARNING: FAILURE TO EXERCISE CAUTION WHEN
WORKING IN HIGH AREAS COULD CAUSE A FALL
AND PERSONAL INJURY.
