15
CAUTION: VERIFY THAT ALL INTERIOR ANTENNAS
MEET THE SEPARATION REQUIREMENTS
DESCRIBED IN THE PREVIOUS CHAPTER AND THAT
NO ANTENNA IS AIMED TOWARD THE EXTERIOR
ANTENNA.
CAUTION: DO NOT CONNECT AN INTERIOR
ANTENNA TO THE SPLITTER INPUT.
4.4 - Internal Antennas
Mount the interior antenna(s) in the location(s) you selected during the planning process.
Be sure to follow the instructions included with the antenna(s) for a safe installation. Remember:
• Dome antennas (SC-222W, etc.) should be mounted in the ceiling as close to the center of the
desired coverage area as possible with the domed side pointing down.
• Flat panel antennas (SC-248W) should be wall-mounted as close as possible to center of the
wall at one end of long narrow space.
1. Mount the antenna.
2. Connect a length of SC-400 or SC-240 cable to the antenna and tighten until hand-tight.
3. If you are installing multiple antennas, run the cable to the splitter location and connect the cable
to one of the outputs on the splitter.
4. Connect another length of SC-400 or SC-240 cable to the input side of the splitter (if used) and
run this cable to the booster location.
Installation
https://www.signalbooster.com | 1-855-846-2654 | [email protected]
