21
1234
1234
3333
3333
03
03
01
01
The DRL2E will interpret this information as 1234
301. Note that a longer on-line time is required for
this format than for a standard 4/2 format. The
default setting for Option [97] is '00'; when pro-
grammed as '00', the option is disabled.
Option [98]: 3/1 Extend - Default [01]
Program Option [98] as '01' to combine 2 round pairs
of 3/1 extended or 3/1 partial extended format into 3/2
output for reporting to the computer and the printer.
For example, with Option [98] enabled, the security
control panel may transmit the following information:
123
123
333
333
3
3
1
1
The DRL2E will interpret this information as: 123 31;
the default setting for Option [98] is '01'; when pro-
grammed as '00', the option is disabled.
Option [99]: Ademco Express - Default [01]
The Ademco 4/1 Express format may cause conflicts
with the Sur-Gard DTMF 4/3 with checksum format
or FBI Super fast without checksum. Therefore, this
option must be programmed to inform the DRL2E
which of the 3 formats may be used.
00
01
02
Sur-Gard DTMF 4/3 with checksum
Ademco 4/1 Express
FBI without checksum
Option [9A]: Error Counter
Program this option to determine the number of bad
rounds from a pulse communicator the line card will
receive before hanging up.
Option [9B]: Echo Canceller - Default [00]
00
01
Disabled
Enabled: Disable echo canceller
Option [9C]: Acron RS-232 - Default [01]
When this option is programmed as '00', the DRL2E
will convert the Acron Super Fast format signal into 3/
2 or 4/2 format (Ex: AAAAsXssYY[DC4] ). If it is pro-
grammed as '01' the Acron Super Fast will be sent to
the computer as indicated below:
9RRLssssAAAACCCCCCCCC[DC4]
Where 9 = protocol number
RR = receiver number
L = line number
ssss = spaces
AAAA = account code
CCCC = channel 1-4
CCCC = channel 5-8
[DC4] = terminator
Option [9D]: MODEM II RS-232 - Default [01]
The DRL2E is able to decode the Modem II formats.
The handshake 0B needs to be programmed as one
of the handshakes of the DRL2E for the Modem II
and handshake 0E for Modem IIE or Modem IIIa 2.
Option [9D] determines the protocol sent to the
computer. Note that this option will also affect the
BFSK format only if programmed as 00 or 01.
00
01
02
03
6500 protocol: 1RRLssssssAAAAXXYYYY[DC4]
SG protocol: 6RRLssssssAAAAXXYYYY[DC4]
ModemII to SIA protocol
ModemII to SIA protocol, and text is decoded
and sent
to printer and computer.
NOTE:
Ensure that the automation software sup-
ports settings 02 and 03 if the SIA protocol is
desired.
Option [9E]: Scantronics Select - Default [00]
When this option is programmed as '00', 14 Digit
DTMF will be decoded as Scantronics 4-8-1 with
Checksum.
When this option is programmed as '01', 14 Digit
DTMF will be decoded as Scantronics 5-8-1.
Option [9F]: Ademco High Speed RS-232 - Default
[01]
When this option is programmed as '00', the DRL2E
will convert the High Speed format signal into 4/2
format (E.g. 1RRLssssssAAAAsXssYY[DC4
]
). If it is
programmed as '01' the Ademco High Speed will be
sent to the computer as indicated below:
8RRLAAAAsCCCCsCCCCsC[DC4]
Where 8 = protocol number
RR = receiver number
L = line number
AAAA = account code
CCCC = channel 1-4
s = space
CCCC = channel 5-8
s = space
C = Channel 9
[DC4] terminator
Option [A0]: 11 / 12-Digit DTMF (Acron or
Scantronics) - Default [00]
When this option is programmed as '00', if 11 or 12-
digit DTMF is received, it will be decoded as ACRON
Format.
When this option is programmed as '01', if 11 or 12-
digit DTMF is received, it will be decoded as SCANT-
RONICS Format.
Incoming Format
Decoded Format
00
00
01
01
11-digit DTMF
12-digit DTMF
11-digit DTMF
12-digit DTMF
Acron 3-8
Acron 4-8
Scantronics 2-8-1
Scantronics 3-8-1
Option [A1]: FBI RS-232 - Default [01]
To enable the computer for FBI Super Fast protocol,
program Option [A1] as '01'. When enabled, the
computer output will be as indicated below:
JRRLssssssAAAATZZEss[DC4]
Where:
J = FBI protocol identifier
RR = receiver number
L = line number
s = spaces
AAAA = account code
T = zone type
ZZ = zone number, in hex.
E = event code
if E = 0 and T = 0 : listen in.
Содержание MLR2E
Страница 2: ......
