13
Table type 2:
The receiver will check through the Caller ID section if a
Caller ID number is received. If the Caller ID is received but
the Caller ID was not found, it will check in the virtual
receiver number and line number located in the dynamic
options or profiles, and use profile 0.
On a standard receiver, the Automation output would look
similar to the following:
The duplication of accounts is not possible, as long as they
are dialling different numbers.
The output will become:
Where RR is the value programmed in Option 75 and L is
the value programmed in Option 74.
6.2
DRL2E Programming Commands
There are 5 main programming commands available
on the DRL2E line card module:
• F7 Options Programming
• FA Buffer Output
• FE Line Card Buffer Maintenance
Some programming commands feature options that
provide a variety of different functions; each com-
mand is fully explained in the following sections of this
manual.
Entering Commands
Commands are entered on the CPM2 keypad using
the following format:
LCard; Comd; Op; Cd; Sc
• LCard: 'Line Card' is the line card number; enter a
hexadecimal number from 01 to 0E for line cards 1
through 14
• Comd: 'Command' is the command; enter a com-
mand from the list above
• Op: 'Option' indicates a function that is part of a
command; the following sections of this manual
will explain which commands have options. Enter
a 2-digit hexadecimal number
• Cd: 'Code' is the code or value to be programmed
for the option; enter a 2-digit hexadecimal number
• Sc: 'Second Code' is a code or value that is only
used with SCADA commands; if required, enter a
2-digit hex number
Example:
The following is how to enter the programming pass-
word and program an option in the 'F7 Options Pro-
gramming' section:
Entering Data
• Press and hold the [C] button on the CPM2 until
the CPM2 displays the following message:
Enter PASS-WORD
****
The default password is 'CAFE'. Enter the password
using the CPM2 keypad.
• When the password is entered, the CPM2 will dis-
play this message:
LCard:__ Comd:__
Op:__ Cd:__ Sc__
• Enter the line card number. In this example, line
card 01 will be used. When '01' is keyed in, the
number will appear on the display as shown below:
LCard:01 Comd:__
Op:__ Cd:__ Sc__
• Enter the command number. In this example, the
F7 Options Programming command will be used.
When 'F7' is keyed in, the command will appear on
the display as shown below:
LCard:01 Comd:F7
Op:__ Cd:__ Sc__
• Enter the option number. In this example, option
[01] will be changed. When '01' is keyed in, the
option will appear on the display as shown below:
LCard:01 Comd:F7
Op:01 Cd:__ Sc__
• Enter the value to be programmed at option 36. In
this example, 01 will be programmed at option
[36] to enable it. When '01' is keyed in, the value
will appear on the display as shown below:
LCard:01 Comd:F7
Op:01 Cd:01 Sc__
Note that 'Sc' is not used and stays blank. After the
value is entered at 'Cd:', press [ACK] or [Escape] to
save the changes.
NOTE:
If the [Escape] button is
pressed before the value at 'Cd:' is entered, the
changes will not be saved.
Verifying Data
• To verify the changes just entered, press and hold
the [ACK] button on the DRL2E until this message
is displayed:
Display Options
ACK:menu SEL:sel
• Press the [SELECT] button to view the system con-
figuration; this message will be displayed:
L 1 Option #01
LCard NumB: 01
Press the [ACK] button to scroll forward through the
configuration displays until you reach option 36, or
press the [SELECT] button to scroll backwards through
the configuration displays. Press [ACK] and [SELECT]
together to return to the Standby mode.
Entry Num-
ber
Caller ID
Received
Represent
Profile#
to be used
0001
0002
0003
14166654492
1938271623
8005764646
1-416-665-4492
01
03
24
1RRLssssssAAAAsYsZZ[DC4]
1RRLssssssAAAAsYsZZ[DC4]
Содержание MLR2E
Страница 2: ......
