Sur-Gard MLR2000, Руководство по установке

Страница: 5 / 52

1
Section 1 - Introduction
The MLR2000 is a Multi-Line, Multi-Format Digital Receiver for
commercial fire and burglary. The basic unit consists of 60 indi-
vidual line-cards (DRL2000) connected to a dual redundant cen-
tral resource, router and protocol converter (CPM2000). The
MLR2000 includes many features, especially high bandwidth
internal buses and high bandwidth external connections to
allow traditional network philosophies to be observed for the
first time on a central station receiver. The MLR2000 can
decode a variety of popular and widely used communication
formats. Refer to Appendix A, DRL2000 Communication For-
mats for a list of the available communication protocols.
The MLR2000's real-time clock and calendar 'stamps' all infor-
mation received with the time and date, and all information
may be printed or forwarded to a computer. To ensure security,
adjustment of the clock, calendar and other programming is
protected by password codes.
1.1 CPM2000
The CPM2000 Central Processing Module oversees opera-
tion of the receivers. Along with its built-in keypad and
LCD message screen, the CPM2000 features TCP/IP, two
parallel printers, one serial printer and two serial computer
interface capability.
1.2 DRL2000
Each DRL2000 module can monitor two telephone lines.
The line card module is equipped with a 256-event non-
volatile memory buffer to record events and correspond-
ing telephone numbers. Caller Source capability is built-in
and telephone numbers can be printed out, sent to auto-
mation and stored in memory. Events and information
stored in memory can be printed at any time. Each line
card also features flash EPROM uploads through the
Debug port for software upgrades or options program-
ming.
1.3 Power and Supervision
1.3.1 Power
The MLR2000 power supplies inputs are 120 Vac at 10A,
60 Hz. Each AC power supply supplies a nominal 28 Vdc
+/-5% power. The receiver is equipped with 24V
rechargeable stand-by battery connections at 160 Ahr.
and an automatic battery charger. Provision is made for an
internal battery pack for temporary use. User supplied
batteries may be used externally but must be fused and
connected to 10-32 lugs supplied via a stud termination.
Full power operation is .5 Amps per line and 1 Amp per
CPM at 28 Vdc nominal. All elements have extensive
power down capabilities and are implemented in CMOS
logic.
1.3.2 Supervision
The stand-by battery voltage and connections are super-
vised. The Line Cards are also continuously supervised to
ensure uninterrupted communication with the CPM2000.
Any trouble conditions are reported on the LCD screens
and sent to the printer and the computer.
The DRL2000 Line Card Module also verifies communica-
tions with the CPM2000. In the event of a malfunction,
the operator will be advised with a visual indication and
the Line Cards will continue to function. Each line card will
continue to receive information.
The printer is supervised for off-line, paper out and other
trouble conditions. The communication link to the com-
puter through the RS232 ports is monitored by the super-
visory 'heartbeat' test transmissions.
1.3.3 Compatibility
Central station automation software packages such as:
• MAS • DICE • SIMS II • GENESYS • S.I.S. • IBS
• MicroKey
support the MLR2000 Sur-Gard interface.
Refer to automation software specifications for compati-
bility.
NOTES: Automation connections are considered
supplementary per UL864 Listing. Compatibility
with the automation software in a system used at a
central station is intended to be handled under a
separate UL1981 software and/or site certification
evaluation.
1.4 CPM2000 Outputs/ Inputs
• The CPM2000 features four switched-negative
(PGMOUT1 is activated when automation fails) outputs,
two relay outputs and four inputs.
1.5 System Overview
• Patented Caller Identification (Call Display) capability
• Patent Pending DNIS Identification
• nonvolatile RAM on each DRL2000 line card module for
programming and event buffer.
• Fast Ethernet communication between line-cards and
CPM
• Flash download for software upgrades
• Up to 64 different options set (profiles per line)
• Patented virtual configurations
• 3/1, 4/2 formats with or without parity, 4/1 without par-
ity at 10, 14, 20, or 40 baud
• 4/1, 4/2, 4/3, and 4/3 DTMF formats
• Optional* formats: 3-2, 4/1, 4/2 extended
• ACRON DTMF format
• Contact ID (DTMF) format
• Adcor 20 baud
• Super fast or high speed DTMF format, with or without
parity
• DTMF 4/1 express format (optional)
• DTMF 4/2 express format
• FBI super fast format with or without parity
• Radionics Modem II, Modem IIE, Modem IIIa2 and BFSK
formats
• SIA format: 110 and 300 baud, tone and data acknowl-
edgement
• SK FSK0, FSK1, FSK2
• Any handshake frequencies by increment of 100 Hz
from 100 Hz to 2300 HZ, Dual Tone, SIA FSK, Modem II
and ITI selected by configuration commands
• Up to 8 different handshakes per profile.
• Large, easy to read 2-line, 16-characters-per-line, LCD
(Liquid Crystal Display) screen
• All modules function individually to help ensure uninter-
rupted operation during hardware or software upgrades
• Inputs on CPM2000 for UPS supervisory
• 255 lines maximum per receiver
• 256-event memory buffer on each individual line card
• Real-time clock
• CPM2000 features 32-bit micro-controller
• Two parallel printer port; three serial RS232 ports and
one 10 BaseT connection.
• Programmable serial ports configuration
• Programmable System Functions: Computer and printer
• Fast transmission of multiple alarms to the computer
and printer to ensure operator's quick response
*All formats noted as optional are selected using configuration commands.
firealarmresources.com