Heatseeker UniPanel®
Solar Pool Heating
19
Solar Pump
Our range of solar pumps are designed to operate for extended periods without any attention or
maintenance.
Following are the periodic maintenance requirements:
1. Keep lint basket clean - empty it regularly.
Lint basket maintenance
Blocked lint basket or suction pipe and no water flow can cause
overheating with consequent pipe and pump components failure and
meltdown (if applicable).
2. Apply suitable waterproof grease to the lint pot ‘O’ ring to ensure positive seal.
3. Ensure electrical passage for cooling airflow to prevent fusing or shock hazards.
4. Maintain a clear passage for cooling airflow to prevent overheating of motor.
5. Maintain water in good chemical balance.
6. Do not allow quantities of sand or grit to continuously pass through pump to prevent “sand
blasting” erosions (use filter sock in lint basket if sand, etc. is being picked up by vacuum).
7. Do not over tighten strainer lid. Never use a tool or handle to tighten lid.
8. Do not add pool salt, chlorine, acid or other chemicals directly to your skimmer.
Do not add chemicals directly to skimmer
This may result in damage to your pump and may void your warranty.
