Chapter IV System menu
14
MLSS Factor: Setting the MLSS/TSS factor in the range of 0.1 ~ 10.
Response Time: Setting the signal response time in the range of 1
~
60s.
Brush Time: Setting the time interval for electrode scraping (1, 5, 15, 30,
60(1h), 240(4h), 720(12h), 1440(1D), 4320(3D), 10080(7D) in min).
Online Calibration
Figure 13
TUR Modification: Correct the turbidity with a correction range of
±
100NTU.
MLSS Calibration: Two-point or four-point calibration of MLSS/TSS
may be chosen, and the specific process is as shown farther below.
Remote Setting
Figure 14
RS485 Setting: Set the address and baud rate of the 485 communication.
Current Transmission: Set the corresponding value of 4mA and the
corresponding value of 20mA for the 4 ~ 20mA output.