Chapter II Installation
4
Chapter II Installation
2.1.Instrument installation
Specify the installation site and installation method of this instrument.
Please be sure to read this part when installing.
Notes for installation
The instrument is panel mounted.
Please install it indoors and avoid wind and rain and direct sunlight.
Please install it in a well-ventilated place to prevent rise of the internal
temperature of this instrument.
When installing this instrument, please install it horizontally and do
not tilt left and right (can be tilted back <30
°
).
The following places shall be avoided during the installation
Places with an ambient temperature of over 50
℃
during operating.
Places with an ambient humidity of over 85% during operating.
Near the electromagnetic source.
Places where mechanical vibration is strong.
The site where the temperature is changed a lot and the moisture
condensation is easily formed.
Places with a lot of oily fume, steam, moisture, dust and corrosive gas.
Installation
Open a 92.5mm * 92.5mm mounting hole on the instrument cabinet or
mounting panel.
Thick of the installation panel: 1.5mm~13mm..
