SUPMEA SUP-2100H Series, Руководство пользователя

Страница: 36 / 50

Chapter 4 Menu window details
www.supmea.com
27
M14
Window for selecting pipe material
Standard pipe materials (that the user need not know the speed )
include:
(0) carbon steel (1) stainless steel (2) cast iron(3) ductile iron
(4) copper (5) PVC (6) aluminum (7) asbestos (8) fiberglass
M15
Window for entering the pipe material speed only for non.standard
pipe materials
M16
Window for selecting the liner material, select none for pipes without
any liner standard liner materials that the user need not know the
speed include:
(1)Tar Epoxy (2)Rubber (3) Mortar (4) Polypropylene (5) Polystryol
(6)Polystyrene (7) Polyester (8) Polyethylene (9) Ebonite (l0) Teflon
M17
Window for entering the liner material speed only for non.standard
liner materials
M18 Window for entering the liner thickness, if there is a liner
M19 Window for entering the ABS thickness of the inside wall of the pipe
M20
Window for selecting fluid type
For standard liquids that the user need not know the liquid speed
include:
(0) water (1) sea water (2) Kerosene (3)Gasoline (4) Fuel oil (5) Crude
oil (6)Propane at -45C (7) Butane at 0C (8)0ther liquids (9) Diesel oil
(10)Caster oil(11)Peanut oil (12) #90 Gasoline (13) #93 Gasoline (14)
Alcohol (15) Hot water at 125C
M21
Window for entering the fluid sonic velocity only for non.standard
liquids
M22 Window for entering the viscosity of the non.standard liquids