Chapter 2 Starting Measurement
www.supmea.com
11
diameter. The display will go to the M11 menu window after the user
presses.
(2) Pressing
and
keys. Each time of the
key pressing will proceed
to the lower-numbered menu window. For example, if the current window is on M12,
the display will go to the number M11 window after pressing the
key.
There are three different types of menu windows:
(1) Menu windows for number entering, like M11 for the entering of pipe outer
diameter.
(2) Menu windows for option selection/selecting options, like Ml4 for the selection
of pipe materials.
(3) Displaying windows only, like M00 to display Velocity, Flow Rate etc.
For number entering windows, the user can directly press the starting digit key
when the user is going to modify the value. For example, when the current window
is on M11, and the user is going to enter 219.2345 as the pipe outer diameter, the
user can get the numbers entered by pressing the following serial keys:.
For the option selection windows, the user should first press the ENT key to enter
into a selection modification mode, then either make the selection by pressing the
and
keys to select the option with a number antecedent to the option. In
the end, the
key must be pressed to make the selection. For example, with
menu window M14 for the selection of pipe material selection, (the
should
be pressed first to enter this menu window if the current menu window is on a
different window. The pipe material is stainless steel which has a number "l"
antecedent to "stainless steel" on the display, the user should first press the
key to enter into a selection modification mode, then either make the selection by
pressing the
and
keys to make the cursor on the line that displays "1.
stainless steel", or make the selection by pressing the
key directly.
Generally, the
key must be pressed to enter a modification mode. If the
"Locked M47 Open' message is indicated on the lowest line of the LCD display, it
means the modification operations is locked out. In such cases, the user should go
to M47 to have the instrument unlocked first before any further modification can be
made
Содержание SUP-2100H Series
Страница 13: ...Chapter 1 Introduction www supmea com 4...
Страница 14: ...Chapter 1 Introduction www supmea com 5...
