6. Installation of Rear Light Bar Assembly:
Get part #15 (rear light bar brackets) & and press down into body of vehicle.
NOTE
: The side of the brackets with multiple screws face the inside of the
vehicle. Attach part #16 (light bar connectors) to the rear brackets. Slide the light
bar into the light bar connectors and slide into place
. Note: The included light
bar is not functional.
7. Installation of Faux Spare Tire Cover:
Align tabs of the spare tire cover to the body of vehicle. Press down
until you hear a click.
Note: This cover does not actually open or
contain a spare tire.
SYNCING THE REMOTE CONTROL:
1. Install batteries into the remote.
2. Remote lights will flash briefly and then go out.
3. After the lights on the remote have shut off and the car in the “OFF” position, press
and hold the car select button on the remote. (The lights on the remote will come on.)
While holding down the “car select” button, turn on the car. Continue holding the “car
select” button throughout the syncing process. When the “car select” light goes out,
the remote is synced to the car.
NOTE:
STOP Button=Parking brake.
