2: Front Tire Assembly:
Get one of the remaining 2 wheels. Add a wheel bushing to the inside of the wheel
and screw hub adaptor to the inside of the wheel with 4 screws. Slide the wheel
onto the driver’s side of the front axle and align the hub adaptor with the motor
grooves. On the outside of the wheel, insert another wheel bushing, a washer and
a nut on the end of the axle. Then tighten down with the supplied lug nut wrench.
Do not over tighten because this could cause premature motor failure. Lastly,
locate a wheel cover and snap into place on the wheel, making sure that the tabs
on the cover are aligned with the slots on the wheel. Repeat this process for the
passenger side rear motor and wheel assembly.