7
Setting Roller Temperature
(See Figure 1 and Figure 2)
1. Press the “SEL” green button
2. Adjust the temperature up or down using the up arrow or the
down arrow.
3. Press the “SEL” green button again to activate the temperature.
Control Panel ( Left )
Figure 1 ( Upper Roller Temperature Control )
Lowers and raises the upper heated roller temperature
Figure 2 ( Lower Roller Temperature Control )
Lowers and raises the lower heated roller temperature
Figure 3 ( Upper Roller ON/OFF Switch )
Toggles the upper heated roller to ON or OFF
Figure 4 ( Lower Roller ON/OFF Switch )
Toggles the lower heated roller to ON or OFF
Control Panel ( Right )
Figure 1 ( Motor Switch )
Toggles the laminator rollers to Forward or Reverse
Figure 2 ( Fans Switch )
Toggles the laminator fans to ON or OFF
Figure 3 ( Speed Control Knob )
Adjusts the speed of the laminator’s heated rollers
Measured in feet per minute ( FPM )
Note: To reverse the direction of lamination, switch
the motor and fan switches to the “reverse” position
Figure 1
Upper Roller Digital
Temperature Control
Figure 2
Lower Roller Digital
Temperature Control
Figure 3
Upper Roller
ON/OFF Switch
Figure 4
Lower Roller
ON/OFF Switch
Figure 2
Fans Switch
(ON/OFF)
Figure 1
Motor Switch
(Forward/Reverse)
Figure 3
Speed Control
Laminator.com
www.laminator.com
