4
Find a Work Area
A separate work station is required to house your laminator. Ample room is necessary to access the
laminator from all four sides. If the laminator is backed against a wall, the laminating film may back
up and jam the equipment. Your laminator must be on a stable, level surface.
Tools necessary to set up your laminator include cutting shears and adhesive tape. For future service
or maintenance, an assortment of Allen wrenches, a flat head screwdriver and a Phillips head
screwdriver are necessary.
Unpacking Your Laminator
The shipping carton contains:
1 Laminator
1 Top Supply Mandrel
1 Bottom Supply Mandrel
1 Feed Table
1 Operating Handbook
*Be sure to save the shipping carton . . .
Should your laminator ever need to be returned for service, the foam-filled carton ensures safe
transit.
NOTE:
Each laminator is test run after it is assembled. Your laminator may have a piece of test film in
the rollers when you receive it. If so, before threading, remove the test film by turning the drive switch
to the “ON” position. The test film will exit the laminator.
Laminator.com
www.laminator.com
