Superrollo GW180 Скачать руководство пользователя страница 37

Страница: 37 / 44

Fault

Possible cause / solution

... the roller shutters stop during downward travel? a) The roller shutters may have hit an obstacle.

Move the roller shutters back up and remove the obstacle.

b) Slats have shifted out of alignment.

If possible, move the roller shutters back up and realign the slats.

c) The roller shutters scrape against the window frame inside

the roller shutter box due to the lack of a pinch roller or

insulation material may have come free and is jamming the

roller shutters.

Open the roller shutter box and rectify the fault.

Lubricate any stiff areas with gliding wax if necessary.

d) The roller shutters are too light.

Increase the weight of the roller shutters by, for example,

adding a piece of flat steel to the bottom slat.

... the indicator light flashes and the

superrollo GW180 / GW185 fails to operate

in either direction?

The maximum running time of the drive has been exceeded,
see page 12/15.
The motor is too hot. The belt winder will be fully operational

again in approx. 1 hour.

... the superrollo GW180 / GW185 fails to react

properly either manually or automatically?

The superrollo GW180 / GW185 is no longer ready for operation.

Carry out a software reset in accordance with the instructions

on page 32 and test the superrollo GW180 / GW185 using the

default factory settings.

20. What to do if... ?

Содержание GW180













































Результаты поиска

Содержание GW180

Отзывы:

Бренды по названию

Популярные бренды

Superrollo GW180, Руководство по эксплуатации и сборке

Результаты поиска

Содержание GW180

Отзывы:

Бренды по названию

Популярные бренды