manualshive.com logo in svg

Superrollo GW180, Руководство по эксплуатации и сборке

Поделиться
Скачать
Superrollo GW180 Скачать руководство пользователя страница 35

35

EN

19.  Removing the belt in the event of unit failure

In the event that the superrollo GW180 / GW185 unit fails 

and the motor no longer runs, you can use the disengag-

ing bracket provided in order to fully remove the belt 

from the belt winder unit, without the need for cutting it.

 WARNING!

There is a risk of injury as the roller shutters may slam 

shut or fall in an uncontrolled manner.

 

◆

Secure the roller shutters from falling, for example, 

by laying something underneath it.

 

◆

Hold on to the belt tightly to stop the roller shutters 

from slamming shut or falling in an uncontrolled 

manner.

 

◆

Get a second person to help you unlatch the unit.

i

4. 

Maintain pressure on the disengaging bracket and pull 

the belt out of the superrollo GW180 / GW185 as far as 

possible.

1. 

 

 

 

Remove the mains plug from the 

 

   socket.

2. 

 

 

 

Turn the superrollo GW180 / GW185 

 

 

 

 completely to the side. 

3. 

Release the drive with the help of the supplied disen-

gaging bracket. A small amount of resistance must be 

overcome when pressing.

5. 

Remove the reel compartment cover. Release the belt 

from the fastening hook and pull it out completely 

from the superrollo GW180 / GW185.

6. 

Press the assembly locking device on the back part 

and remove the superrollo GW180 / GW185 from the 

wall bracket by pulling it downwards.

7. 

 Place the disengaging bracket back into the storage 

compartment.

Drive release

Storage bay

Содержание GW180













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды