Superrollo GW180, Руководство по эксплуатации и сборке

Страница: 26 / 44

26
EN
Additional information about configuring the end
points
The end points must be configured for the roller shutters
to stop at the desired upper and lower positions.
It is imperative that both end points are configured,
otherwise malfunctions may occur.
13. End point adjustment
Set the upper end point
1.
+ Simultaneously press and hold the
buttons.
The roller shutter travels up.
1.1
Tighten the belt slightly, until it is tensioned by
the weight of the roller shutters.
2.
+ Release the buttons, as soon as the roller
shutter reaches the desired position for
the upper end point.
The roller shutters stop and the upper
end point is stored.
ATTENTION!
Setting the wrong upper end point may lead to
overload or damage the superrollo GW180 / GW185
or the drive.
◆
Do not set the upper end point right up to the
limit stop.
◆
Release the button promptly and never allow it to
extend beyond the respective end point.
i
If the superrollo GW180 / GW185 is operated
without an end point setting, the drive will
continue to run as long as one of the two
control buttons is actuated.
The automatic functions remain blocked
until the end point setting is configured.