manualshive.com logo in svg

Superrollo GW180, Руководство по эксплуатации и сборке

Поделиться
Скачать
Superrollo GW180 Скачать руководство пользователя страница 16

16

EN

7.  Safety instructions

Exceeding the maximum permissible running time 

(KB) may overload and damage the superrollo 

GW180 / GW185.

 

◆

The maximum permissible running time for a cycle 

may not be exceeded when the equipment is in oper-

ation. For this reason, the superrollo GW180 / GW185 

has an 

automatic running time limit (KB)

 of four 

minutes.

 

◆

If the running time limit is triggered, then the  

superrollo GW180 / GW185 must be left for at least 12 

minutes to cool down. During this period, the indica-

tor light flashes rapidly. Full operational availability 

is re-established after approx. one hour.

i

Only use the superrollo GW180 / GW185 for opening and 

closing flat roller shutters with a permissible belt.

According to DIN EN 13659, it is necessary to determine 

that the movement conditions for the shutters are  

maintained in accordance with EN 12045.

 

◆

The displacement must be of at least 40 mm on the 

lower edge in the rolled-out position with a force of 

150 N in the upwards direction.

 

◆

In doing so, it must be ensured that the extending 

speed of the shutters for the final 0.4 m is less than 

0.15 m/s.

7.1  Intended use

i

  Mechanical locks of any kind are not suitable 

for automated operation with this device.

i

Содержание GW180













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды