Supero X9SCAA Скачать руководство пользователя страница 67

Страница: 67 / 87

Chapter 4: AMI BIOS

4-7

Enhanced C State (Available when CPU C State Report is Enabled)

Use this feature to enable enhanced CPU sleep state reporting. The options
are

Enabled

and Disabled.

CPU Hard C4E (Available when CPU C State Report is Enabled)

Use this feature to enable the hard C4E function reporting. The options are

Enabled

and Disabled.

C4 Exit Timing (Available when CPU C State Report is Enabled)

This feature allows the user to control how quickly the CPU voltage will stabilize
when exiting from a C4 state. The options are Default,

Fast

, and Slow.

C-State POPDOWN (Available when CPU C State Report is Enabled)

When set to disabled, this feature prevents automatic return to a previous C3 or
C4 state. The options are

Enabled

and Disabled.

C-State POPUP (Available when CPU C State Report is Enabled)

When set to enabled, this feature will move the system from a C3/C4 state to a C2
state (upon bus master request) and automatically enable bus masters. The options
are Disabled and Enabled.



IDE/SATA Configuration

When this submenu is selected, the AMI BIOS automatically detects the presence
of the SATA Devices and displays the following items:

SATA Controllers

This item enables or disables the on board SATA controller. The options are

En-

abled

and Disabled:

SATA Mode Selection

This item selects the mode for the installed drives. The options are IDE and

AHCI

The following are displayed depending on your selection:

IDE Mode

No additional items are displayed when IDE Mode is selected:

AHCI Mode

The following items are displayed when AHCI Mode is selected:

Port 0, Port 1 Speed Limit

Use this option to set the speed limit for the selected port. The options
are

No Limit

, GEN1 Rate and GEN2 Rate.

Содержание X9SCAA
























































































Результаты поиска

Содержание X9SCAA

Отзывы:

Похожие инструкции для X9SCAA

Бренды по названию

Популярные бренды

Supero X9SCAA, Руководство пользователя

Результаты поиска

Содержание X9SCAA

Отзывы:

Похожие инструкции для X9SCAA

Бренды по названию

Популярные бренды