Supero X9SCAA Скачать руководство пользователя страница 63

Страница: 63 / 87

Chapter 4: AMI BIOS

4-3

System Overview:

The following BIOS information will be displayed:

System Time/System Date

Use this option to change the system time and date. Highlight

System Time

Sys-

tem Date

using the arrow keys. Enter new values through the keyboard. Press the

<Tab> key or the arrow keys to move between fields. The date must be entered in

Day MM/DD/YY format. The time is entered in HH:MM:SS format. (

Note:

The time

is in the 24-hour format. For example, 5:30 P.M. appears as 17:30:00.)

Supermicro X9SCAA/-L

Version: This item displays the version of the BIOS used in the system.
Build Date: This item displays the day this version of BIOS was built.

Processor

This displays the processor type, speed, physical count, and logical count.

System Memory

This displays the size of memory available in the system.

Содержание X9SCAA
























































































Результаты поиска

Содержание X9SCAA

Отзывы:

Похожие инструкции для X9SCAA

Бренды по названию

Популярные бренды

Supero X9SCAA, Руководство пользователя

Результаты поиска

Содержание X9SCAA

Отзывы:

Похожие инструкции для X9SCAA

Бренды по названию

Популярные бренды