Supero X9SCAA Скачать руководство пользователя страница 58 | Manualshive

Страница: 58 / 87

background image

3-4

X9SCAA Motherboard Series User's Manual

BIOS warning message and the information on how to update your BIOS on our

web site. Select your motherboard model and download the BIOS (.rom) file to

your computer. Also, check the current BIOS revision and make sure that it is

newer than your BIOS before downloading. You may choose the zip file or the
.exe file. If you choose the zipped BIOS file, please unzip the BIOS file onto a
bootable device or a USB pen/thumb drive. To flash the BIOS, run the batch
file named "ami.bat" with the new BIOS ROM file from your bootable device or

USB pen/thumb drive. Use the following format:

F:\> ami.bat BIOS-ROM-filename.xxx <Enter>

Notes:

Always use the file named “ami.bat” to update the BIOS and insert a

space between "ami.bat" and the filename. The BIOS-ROM-filename will bear

the motherboard name (i.e., X9SCAA) and build version as the extension. For

example, "X9SCAA0.526".

When completed, your system will automatically reboot. If you choose the .exe

file, please run the .exe file under Windows to create the BIOS flash floppy disk.
Insert the floppy disk into the system you wish to flash the BIOS. Then, boot
the system to the floppy disk. The BIOS utility will automatically flash the BIOS

without any prompts. Please note that this process may take a few minutes
to complete. Do not be concerned if the screen is paused for a few minutes.

Warning

: Do not shut down or reset the system while updating the BIOS

to prevent possible system boot failure!

When the BIOS flashing screen is completed, the system will reboot and will
show “Press F1 or F2”. At this point, you will need to load the BIOS defaults.
Press <F1> to go to the BIOS setup screen, and press <F9> to load the default
settings. Next, press <F10> to save and exit. The system will then reboot.

Note:

The SPI BIOS chip installed on this motherboard is not removable. To

repair or replace a damaged BIOS chip, please send your motherboard to RMA
at Supermicro for service.

If your BIOS crashes and your motherboard will no longer boot, please read Ap-
pendix C - UEFI BIOS Recovery Instructions for instructions.

Question:

What's on the CD that came with my motherboard?

Answer:

The supplied compact disc has quite a few drivers and programs

that will greatly enhance your system. We recommend that you review the CD
and install the applications you need. Applications on the CD include chipset
drivers for Windows, security and audio drivers.

«
...
56
57
58
59
60
...
»

Содержание X9SCAA
























































































Отзывы:

Нет отзывов

Похожие инструкции для X9SCAA

Бренд: Acer Страницы: 2

Бренд: AOpen Страницы: 8

B550M AORUS PRO-P

Бренд: Gigabyte Страницы: 44

Бренд: VIA Technologies Страницы: 14

Бренд: EVGA Страницы: 80

Бренд: AKM Страницы: 30

Бренд: ASROCK Rack Страницы: 93

Бренд: Supermicro Страницы: 91

Бренд: Texas Instruments Страницы: 54

Бренд: austriamicrosystems Страницы: 19

Бренд: Texas Instruments Страницы: 20

Бренд: MSI Страницы: 92

Бренд: Avalue Technology Страницы: 92

Бренд: NXP Semiconductors Страницы: 7

Бренд: Microchip Technology Страницы: 18

FIERCE 2 54LB/48

Бренд: Watersnake Страницы: 44

Venom SXW 34/26

Бренд: Watersnake Страницы: 44

ADVANCE SWS 70/36

Бренд: Watersnake Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды