Supero X9DRW-3F Скачать руководство пользователя страница 91

Страница: 91 / 107

Chapter 4: AMI BIOS

4-21

TXT (LT-SX) Support:

This item indicated if the Intel TXT support is enabled

or disabled.

Intel TXT (LT-SX) Dependencies

This feature displays the features that need to be enabled for the Intel Trusted
Execution Technology to work properly in the system.

VT-d Support

: Intel Virtualization Technology with Direct I/O support

VT Support

: Intel Virtualization Technology support

TPM Support

: Trusted Platform support

TPM State

: Trusted Platform state



Intel ME Subsystem Configuration

This feature displays the following ME Subsystem Configuration settings.

•

ME BIOS Interface Version

•

ME Version

iSCSI Configuration:

This item displays iSCSI configuration information:

iSCSI Initiation Name

This item displays the name of the iSCSI Initiator, which

is a unique name used in the world.



Add an Attempt



Delete Attempts



Commit Changes and Exit

Save the changes and exit from the page.



Discard Changes and Exit

Discard the changes and exit from the page.

Содержание X9DRW-3F












































































































Результаты поиска

Содержание X9DRW-3F

Отзывы:

Похожие инструкции для X9DRW-3F

Бренды по названию

Популярные бренды

Supero X9DRW-3F, Руководство пользователя

Результаты поиска

Содержание X9DRW-3F

Отзывы:

Похожие инструкции для X9DRW-3F

Бренды по названию

Популярные бренды