Supero X9DRW-3F, Руководство пользователя

Страница: 31 / 107

Chapter 2: Installation
2-7
4. Once the heatsink is loosened, remove it from the motherboard.
Note: To reinstall the CPU and/or the heatsink, clean the surface of the
CPU and/or the heatsink to get rid of the old thermal grease. Reapply the
proper amount of thermal grease on the surface before reinstalling them
on the motherboard.
2-3 Installing and Removing the Memory Modules
Note : Check Supermicro's Website for recommended memory modules.
CAUTION
Exercise extreme care when installing or removing DIMM
modules to prevent any possible damage.
Installing & Removing DIMMs
1. Insert the desired number of DIMMs into the memory slots, starting with P1-
DIMM #A1. (For best memory performance, please use the modules of the
same type and speed in the same bank.)
2. Push the release tabs outwards on both ends of the DIMM slot to unlock it.
X9DRW-3F/iF
Rev. 1.02 Release Tabs
Notches
3. Align the DIMM module key with the receptive point on the memory slot.
4. Align the notches on the both ends of the module with the receptive points on
ends of the slot.
5. Use two thumbs together to press the notches of the module straight down
into the slot until the module snaps into place.