manualshive.com logo in svg

Supero SuperWorkstation 5035B-T, Руководство пользователя

Поделиться
Скачать
Supero SuperWorkstation 5035B-T Скачать руководство пользователя страница 87

Chapter 7: BIOS

7-23

7-8 Exit

Choose Exit from the Phoenix BIOS Setup Utility main menu with the arrow keys.  

You should see the following display.  All Exit BIOS settings are described in this 

section.

Exit Saving Changes

Highlight this item and hit <Enter> to save any changes you made and to exit the 

BIOS Setup utility.

Exit Discarding Changes

Highlight this item and hit <Enter> to exit the BIOS Setup utility without saving any 

changes you may have made.

Load Setup Defaults

Highlight this item and hit <Enter> to load the default settings for all items in the 

BIOS Setup.  These are the safest settings to use.

Discard Changes

Highlight this item and hit <Enter> to discard (cancel) any changes you  made.  

You will remain in the Setup utility.

Save Changes

Highlight this item and hit <Enter> to save any changes you made.  You will remain 

in the Setup utility.

Содержание SuperWorkstation 5035B-T























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды