Supero SuperWorkstation 5035B-T, Руководство пользователя

Страница: 36 / 118

5-8
S
uper
W
orkstation 5035B-T User's Manual
Installing the Heat Sink
Fan wires
Thermal grease
CPU
Heat sink
fastener
Heat sink fi ns
Locate the CPU fan on the mother-
board. (Refer to the layout on the
right for the CPU fan location.)
Position the heat sink in such a
way that the heat sink fan wires are
closest to the CPU fan and are not
interfering with other components.
Inspect the CPU fan wires to make
sure the wires are routed through
the bottom of the heat sink.
Remove the thin layer of protective
fi lm from the copper core of the heat
sink. (Note : the CPU may overheat
if the protective fi lm is not removed
from the heat sink.) Apply the
proper amount of thermal grease to
the CPU. If your heat sink came with
a thermal pad, please ignore this
step. If necessary, rearrange the
wires to make sure that they are not
pinched between the heat sink and
the CPU. Also make sure to keep
clearance between the fan wires
and the fi ns of the heat sink.
Align the four heat sink fasteners
with the mounting holes on the
motherboard.
Gently push the pairs of diagonal
fasteners (#1 & #2 and #3 & #4)
into the mounting holes until you
hear a click. Note : Make sure to
orient each fastener so that the
narrow end of the groove is point-
ing outward.
Repeat step 6 to insert all four heat
sink fasteners into the mounting
holes.
1.
2.
3.
4.
5.
6.
7.
#2
#3
#4
#1
Narrow end of the groove
points outward
Note: the heat sink for the 5035B-
T (SNK-P0015A4) is an optional
component.