![Supero SuperWorkstation 5035B-T Скачать руководство пользователя страница 65](http://html1.mh-extra.com/html/supero/superworkstation-5035b-t/superworkstation-5035b-t_user-manual_1405032065.webp)
Chapter 7: BIOS
7-1
Chapter 7
BIOS
7-1 Introduction
This chapter describes the Phoenix BIOS™ Setup utility for the C2SBX. The Phoe-
nix ROM BIOS is stored in a fl ash chip and can be easily upgraded using a fl oppy
disk-based program.
Note:
Due to periodic changes to the BIOS, some settings may have been added
or deleted and might not yet be recorded in this manual. Please refer to the Manual
Download area of the Supermicro web site <http://www.supermicro.com> for any
changes to the BIOS that may not be refl ected in this manual.
System BIOS
BIOS is the Basic Input Output System used in all IBM
®
PC, XT™, AT
®
, and PS/2
®
compatible computers. The Phoenix BIOS stores the system parameters, types of
disk drives, video displays, etc. in the CMOS. The CMOS memory requires very
little electrical power. When the computer is turned off, a backup battery provides
power to the CMOS logic, enabling it to retain system parameters. Each time the
computer is powered on the computer is confi gured with the values stored in the
CMOS logic by the system BIOS, which gains control at boot up.
How To Change the Confi guration Data
The CMOS information that determines the system parameters may be changed by
entering the BIOS Setup utility. This Setup utility can be accessed by pressing the
<Delete> key at the appropriate time during system boot. (See below.)
Starting the Setup Utility
Normally, the only visible POST (Power On Self Test) routine is the memory test. As
the memory is being tested, press the <Delete> key to enter the main menu of the
BIOS Setup utility. From the main menu, you can access the other setup screens,
such as the Security and Power menus. Beginning with Section 4-3, detailed de-
scriptions are given for each parameter setting in the Setup utility.
Warning:
Do not shut down or reset the system while updating BIOS to
prevent possible boot failure.
Note:
The SPI BIOS chip used in the C2SBX is not removable. To replace a dam-
aged SPI BIOS chip, please send the motherboard to Supermicro for repair.
Содержание SuperWorkstation 5035B-T
