Supero SuperWorkstation 5033C-T, Руководство пользователя

Страница: 40 / 96

5-10
S
UPER
W
ORKSTATION 5033C-T User's Manual
5-9 Connector
Definitions
Power Supply Connectors
The primary power supply connector
on the P4SCT+II meets the SSI
(Superset ATX) 24-pin specifica-
tion. Refer to the table on the right
for the pin definitions of the ATX
2 4 - p i n p o w e r c o n n e c t o r . Y o u
must also connect the 4-pin J21
power connector to your power
supply. Refer to the table below
right for the J24 (12V) connector.
Important : you must connect J21 to
your power supply to meet the ATX
safety requirements.
Pins #
1 & 2
3 & 4
Definition
Ground
+12 V
+12V 4-pin PWR
Connector
(J21)
Required
Connection
ATX Power Supply 24-pin Connector
Pin Definitions
Pin Number Definition
13
+3.3V
14 -12V
15 COM
16 PS_ON#
17 COM
18 COM
19 COM
20 Res(NC)
21 +5V
22 +5V
23 +5V
24 COM
Pin Number Definition
1 +3.3V
2 +3.3V
3 COM
4 +5V
5 COM
6 +5V
7 COM
8 PW R_OK
9 5VSB
10 +12V
11 +12V
12 +3.3V
PW_ON Connector
The PW_ON connector is located on
pins 1 and 2 of JF1. This header
should be connected to the chassis
power button, which you may also
configure to put the system into sus-
pend mode (see the Power Button
Mode setting in BIOS). To turn off
the power when the suspend mode is
enabled, depress the power button
for at least 4 seconds. See the table
on the right for pin definitions.
Pin
Number
1
2
Definition
PW _ON
+3V
PW_ON
Pin Definitions
(JF1)