Supero SuperWorkstation 5033C-T, Руководство пользователя

Страница: 15 / 96

Chapter 1: Introduction
1-5
1-3 Chassis Features
The SuperWorkstation 5033C-T is a mid-tower workstation type configuration.
The following is a general outline of the main features of the SC733T-350 chassis.
System Power
When configured as a SuperWorkstation 5033C-T, the SC733T-350 chassis in-
cludes a single low-noise 350W power supply.
Serial ATA Subsystem
The SC733T-350 chassis was designed to support up to four Serial ATA hard
drives. The Serial ATA drives are hot-swappable units. ATA/100 IDE drives are
also supported.
Control Panel
The SC733T-350's control panel provides important system monitoring and con-
trol information. LEDs indicate power on, network activity, hard disk drive activity
and overheat conditions. The control panel also includes a main power button
and a system reset button.
Rear I/O Panel
The rear I/O panel on the SC733T-350 provides seven motherboard expansion
slot, one COM port (another is internal), two USB ports, PS/2 mouse and key-
board ports, a parallel (printer) port, a graphics port and two Gb Ethernet ports.
(See Figure 1-2.)