Supero SUPERSERVER AS-4021GA-62R+F, Руководство пользователя

Страница: 85 / 116

Chapter 6: Advanced Chassis Setup
6-11
Hard Drive
Hard Drive Tray
Figure 6-11: Adding a Hard Drive to the Drive Carrier
Place the hard drive to the hard drive tray. Make sure The hard drive can 4.
be SAS or SCSI depending on your motherboard. The hard drive may not
completely fi ll the tray. See Figure 6-11 for details.
Secure the hard drive to the carrier with four screws from the bottom. 5.
Slide the hard drive into the chassis until the carrier clicks into place. 6.
Repeat these steps for each hard drive carrier. 7.
Warning: Except for short periods of time (swapping hard drives), do
not operate the server with the hard drive carriers removed.
!
Warning: It is recommended that only Enterprise level Hard Disk
Drives be used. Please see http://www.supermicro.com/products/nfo/
fi les/storage/SAS-1-CompList-110909.pdf for details.
!