Supero SUPERSERVER AS-4021GA-62R+F, Руководство пользователя

Страница: 63 / 116

Chapter 5: Advanced Serverboard Setup
5-27
VGA Enable/Disable
JPG1 allows you to enable or disable the
VGA port. The default position is on pins 1
and 2 to enable VGA. See the table on the
right for jumper settings.
VGA Enable/Disable
Jumper Settings (JPG1)
Jumper Setting Defi nition
Pins 1-2 Enabled
Watch Dog Enable/Disable
JWD enables the Watch Dog function, a
system monitor that takes action when a
software application freezes the system.
Jumping pins 1-2 will have WD reboot the
system if a program freezes. Jumping pins
2-3 will generate a non-maskable interrupt
for the program that has frozen. See the
table on the right for jumper settings. Watch
Dog must also be enabled in BIOS.
Note: when Watch Dog is enabled, the user
must write their own application software to
disable the Watch Dog Timer.
Watch Dog
Jumper Settings (JWD)
Jumper Setting Defi nition
Pins 1-2 Reset
Pins 2-3 NMI
Open Disabled
TPM Support Enable
JPT1 allows the user to enable TPM (Trusted
Platform Modules) support to enhance data
integrity and system security. See the table
on the right for jumper settings. The default
setting is enabled.
TPM Enable/Disable
Jumper Settings (JPG1)
Jumper Setting Defi nition
Pins 1-2 Enabled
Pins 2-3 Disabled
SAS Enable/Disable
Jumper Settings (JPS1)
Jumper Setting Defi nition
Pins 1-2 Enabled
SAS Enable/Disable
JPS1 allows you to enable or disable the
SAS controller. The default position is on
pins 1 and 2 to enable SAS. See the table
on the right for jumper settings.
LAN Enable/Disable
Change the setting of jumper JPL to enable
or disable the LAN Ethernet ports. See the
table on the right for jumper settings. The
default setting is enabled.
LAN Jumper Settings
(JPL)
Jumper Setting Defi nition
Pins 1-2 Enabled
Pins 2-3 Disabled