Supero SuperServer 7046T-H6R Скачать руководство пользователя страница 94

Страница: 94 / 102

7-26

UPER

ERVER 7046T-H6R/7046T-H6RF User's Manual

Boot Device Priority

This feature allows the user to specify the sequence of priority for the Boot Device.

The settings are 1st boot device, 2nd boot device, 3rd boot device, 4th boot device,

5th boot device and Disabled.

1st Boot Device - [USB: XXXXXXXXX]/2nd Boot Device - [CD/DVD:

XXXXXXXXX]

Removable Drives

This feature allows the user to specify the boot sequence from available Removable

Drives. The settings are 1st boot device, 2nd boot device, and Disabled.

1st Drive - [USB: XXXXXXXXX]/2nd Drive

CD/DVD Drives

This feature allows the user to specify the boot sequence from available CD/DVD

Drives (i.e., 1st Drive, 2nd Drive, etc).

Retry Boot Devices

If this item is enabled, the BIOS will automatically attempt to boot from a speci-

fi ed boot device again after its initial failure to boot. The options are Enabled and

Disabled

7-5 Boot

Confi guration

Use this feature to confi gure boot settings.

Содержание SuperServer 7046T-H6R







































































































Результаты поиска

Содержание SuperServer 7046T-H6R

Отзывы:

Бренды по названию

Популярные бренды

Supero SuperServer 7046T-H6R, Руководство пользователя

Результаты поиска

Содержание SuperServer 7046T-H6R

Отзывы:

Бренды по названию

Популярные бренды