Supero SuperServer 7046T-H6R Скачать руководство пользователя страница 87

Страница: 87 / 102

Chapter 7: BIOS

7-19

system cooling. Select "Full Speed/FS" to allow the onboard fans to run at full

speed for maximum cooling. The FS setting is recommended for special system

confi guration or debugging. Select "Performance/PF" for better system cooling. The

PF setting is recommended for high-power-consuming and high-density systems.

Select "Balanced/BL" for the onboard fans to run at a speed that will balance the

needs between system cooling and power saving. The BL setting is recommended

for regular systems with normal hardware confi gurations. Select "Energy Saving/ES"

for best power effi ciency and maximum quietness. The Options are:

Full Speed

Performance, Balanced, and Energy Saving.

Voltage Readings

The following voltage readings will be displayed.

CPU1 Vcore, CPU2 Vcore, CPU1 Vtt, CPU2 Vtt, CPU1 DIMM, CPU2 DIMM, 1.1V,

1.5V, 1.8V, 3.3V, 12V, 5V, 3.3 Vsb, and VBAT

ACPI Confi guration

Use this feature to confi gure Advanced Confi guration and Power Interface (ACPI)

power management settings for your system.

ACPI Aware O/S

Select Yes to enable ACPI support if it is supported by the OS to control ACPI

through the Operating System. Otherwise, disable this feature. The options are

Yes

and No.

ACPI Version Features

The options are ACPI v1.0,

ACPI v2.0

and ACPI v3.0. Please refer to ACPI's website

for further explanation: http://www.acpi.info/.

PS2 KB/MS Wake Up

Select Enable to "wake-up" the system using either the PS2 keyboard or mouse

when the system is in S3 (Sleep) or S4 (Hibernate) state. The options are Enabled

and

Disabled

ACPI APIC Support

Select Enabled to include the ACPI APIC Table Pointer in the RSDT (Root System

Description Table) pointer list. The options are

Enabled

and Disabled.

APIC ACPI SCI IRQ

When this item is set to Enabled, APIC ACPI SCI IRQ is supported by the system.

The options are Enabled and

Disabled

Содержание SuperServer 7046T-H6R







































































































Результаты поиска

Содержание SuperServer 7046T-H6R

Отзывы:

Бренды по названию

Популярные бренды

Supero SuperServer 7046T-H6R, Руководство пользователя

Результаты поиска

Содержание SuperServer 7046T-H6R

Отзывы:

Бренды по названию

Популярные бренды