Supero SuperServer 7046T-H6R, Руководство пользователя

Страница: 70 / 102

7-2
S
UPER
S
ERVER 7046T-H6R/7046T-H6RF User's Manual
Starting the Setup Utility
Normally, the only visible Power-On Self-Test (POST) routine is the memory test.
As the memory is being tested, press the <Delete> key to enter the main menu of
the AMI BIOS Setup Utility. From the main menu, you can access the other setup
screens. An AMI BIOS identifi cation string is displayed at the bottom left corner of
the screen below the copyright message.
Warning! Do not upgrade the BIOS unless your system has a BIOS-related
issue. Flashing the wrong BIOS can cause irreparable damage to the
system. In no event shall Supermicro be liable for direct, indirect, special,
incidental, or consequential damages arising from a BIOS update. If you
have to update the BIOS, do not shut down or reset the system while the
BIOS is updating. This is to avoid possible boot failure.
7-2 Main Setup
When you fi rst enter the AMI BIOS Setup Utility, you will enter the Main setup screen.
You can always return to the Main setup screen by selecting the Main tab on the
top of the screen. The Main BIOS Setup screen is shown below.
System Overview: The following BIOS information will be displayed:
System Time/System Date
Use this option to change the system time and date. Highlight System Time or
System Date using the arrow keys. Key in new values through the keyboard and
press <Enter>. Press <Tab> to move between fi elds. The date must be entered in
MM/DD/YY format. The time is entered in HH:MM:SS format. ( Note: The time is in
the 24-hour format. For example, 5:30 P.M. appears as 17:30:00.)