Supero SuperServer 7042P-8R, Руководство пользователя

Страница: 52 / 106

5-18
S
UPERSERVER 7042P-8R User’s Manual
SCSI Enable/Disable
The SCSI Termination jumper at
JP22 allows you to enable or dis-
able the onboard SCSI controller.
The normal (default) position is on
pins 1-2 to enable SCSI termina-
tion. See the table on the right for
jumper settings.
Ju m p e r
P o sitio n
P in s 1 -2
P in s 2 -3
D e fin itio n
E n a b le d
D isa b le d
S C S I E n a b le /D is a b le
J u m p e r S e tting s
(J P 2 2 )
Chassis/Overheat Fan
Select
JP33 allows you to select to use ei-
ther the CPU fan or the Chassis
fan. The default position is open to
select the CPU fan. The CPU Chas-
sis fan is intended for use with
Supermicro chassis. See the table
on the right for jumper settings.
Ju m p e r
P o sitio n
O p e n
C lo se d
D e fin itio n
C P U
C P U C h a ssis
C P U C h a s s is /C P U F a n
S e le c t J u m p e r S e ttin g s
(J P 3 3 )
GLAN Enable/Disable
Change the setting of jumper JD4
to enable or disable the onboard
GLAN ports (GLAN1 and GLAN2)
on the motherboard. See the table
on the right for jumper settings.
The default setting is enabled
J u m p e r
P o s itio n
P in s 1 -2
P in s 2 -3
D e fin ition
E n a b le d
D is a b led
G L AN
E n a b le/D is a b le
J u m p e r S e ttin g s
(J D 4 )
VGA Enable/Disable
JP4 allows you to enable or disable
the VGA port. The default position
is on pins 1 and 2 to enable VGA.
S e e t h e t a b l e o n t h e r i g h t f o r
jumper settings.
Ju m p e r
P o sitio n
1 -2
2 -3
D e fin itio n
E n a b le d
D isa b le d
V G A E n a b le /D is a b le
J u m p e r S e tting s
(J P 4 )