Supero SuperServer 7042P-8R, Руководство пользователя

Страница: 3 / 106

iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC techni-
cians. It provides information for the installation and use of the Super-
Server 7042P-8R. Installation and maintainance should be performed by
experienced technicians only.
The SuperServer 7042P-8R is a high-end, dual processor 4U tower/
rackmountable server based on the SC742S-420 4U rackmount server chas-
sis and the P4DP8-G2, a dual processor motherboard that supports single
or dual Intel Xeon
®
processors of 1.5 to 2.4 GHz and faster at a Front Side
(system) Bus speed of 400 MHz and up to 16 GB PC1600 (DDR-200) SDRAM
main memory.
Manual Organization
Chapter 1: Introduction
The first chapter provides a checklist of the main components included with
the server system and describes the main features of the SUPER P4DP8-G2
mainboard and the SC742S-420 chassis, which make up the SuperServer
7042P-8R.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer
7042P-8R into a rack and check out the server configuration prior to pow-
ering up the system. If your server was ordered without processor and
memory components, this chapter will refer you to the appropriate sections
of the manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as
other LEDs located throughout the system.