Supero SuperServer 7034L-i, Руководство пользователя

Страница: 18 / 110

2-4
S
UPERSERVER 7034L-i User's Manual
2-5 Checking the Drive Bay Setup
Next, you should check to make sure the peripheral drives have been properly
installed and all connections have been made.
1. Accessing the drive bays
All drives can be accessed from the front of the server. When installing or
removing the CD-ROM, IDE hard drives or a fl oppy drive, you will also need to
remove the left chassis cover.
2. Installing components into a 5.25" drive bay
To install components into one of the 5.25" drive bays, you must fi rst remove
the left chassis cover as described in the previous section. Refer to Chapter 6
for details.
3. Installing CD-ROM and fl oppy disk drives
Refer to Chapter 6 if you need to reinstall a CD-ROM and/or a fl oppy disk drive
to the system.
4. Check the SATA/IDE disk drives
Depending upon your the confi guration, your system may have one or more SATA
or IDE hard drives already installed. If you need to install an SATA or IDE hard
drive, please refer to Chapter 6.
5. Check the airfl ow
Airfl ow is provided by one 9-cm chassis cooling fan and a 12-cm exhaust fan.
The system component layout was carefully designed to promote optimal airfl ow
through the chassis interior. A specially designed air shroud enables the 9-cm
fan to suffi ciently supply cool air to all system components. Also note that all
power and data cables have been routed in such a way that they do not block
the airfl ow generated by the fans. Keep this in mind when you reroute them
after working on the system.
6. Supplying power to the system:
The last thing you must do is to provide input power to the system. Plug the
power cord from the power supply unit into a high-quality power strip that offers
protection from electrical noise and power surges. It is recommended that you
use an uninterruptible power supply (UPS). Finally, depress the power on button
on the front of the chassis.