Supero SuperServer 6037R-72RFT Скачать руководство пользователя страница 81

Страница: 81 / 102

Chapter 7: BIOS

7-15



South Bridge

This feature allows the user to confi gure the settings for the Intel PCH chip.

PCH Information

This feature displays the following PCH information.

•

Name

: This item displays the name of the PCH chip.

•

Stepping

: This item displays the status of the PCH stepping.

All USB Devices

Select Enabled to enable all onboard USB devices. The options are

Enabled

and Disabled. When set to enabled, EHCI Controller 1 and 2 will appear below.

EHCI Controller 1/ EHCI Controller 2

Select Enabled to enable Enhanced Host Interface (EHCI) Controller 1 or Con-

troller 2 to improve overall platform performance. The options are

Enabled

and

Disabled.

Legacy USB Support (Available when USB Functions is not Disabled)

Select Enabled to support legacy USB devices. Select Auto to disable legacy

support if USB devices are not present. Select Disable to have USB devices

available for EFI (Extensive Firmware Interface) applications only. The settings

are

Enabled,

Disabled and Auto.

Port 60/64 Emulation

Select Enabled to enable I/O port 60h/64h emulation support for the legacy USB

keyboard so that it can be fully supported by the operating systems that do not

recognize a USB device. The options are Disabled and

Enabled

EHCI Hand-off

Select Enabled to enable support for operating systems that do not support

Enhanced Host Controller Interface (EHCI) hand-off. When enabled, EHCI

ownership change will be claimed by the EHCI driver. The options are

Disabled

and Enabled.



SATA Confi guration

When this submenu is selected, the AMI BIOS automatically detects the presence

of IDE or SATA devices and displays the following items.

SATA Port0~SATA Port5

The AMI BIOS displays the status of each SATA port as detected by the BIOS.

Содержание SuperServer 6037R-72RFT







































































































Результаты поиска

Содержание SuperServer 6037R-72RFT

Отзывы:

Похожие инструкции для SuperServer 6037R-72RFT

Бренды по названию

Популярные бренды

Supero SuperServer 6037R-72RFT, Руководство пользователя

Результаты поиска

Содержание SuperServer 6037R-72RFT

Отзывы:

Похожие инструкции для SuperServer 6037R-72RFT

Бренды по названию

Популярные бренды