Supero SUPERSERVER 6026T-TF, Руководство пользователя

Страница: 62 / 106

6-4
S
UPER
S
ERVER 6026T-TF Manual
Figure 6-2. System Fan Removal
6-4 Drive Bay Installation/Removal
Accessing the Drive Bays
You do not need to access the inside of the chassis to replace or swap SATA drives.
Proceed to the next step for instructions. You must use standard SATA drives in
the system.
For installing/removing the DVD-ROM, you will need to gain access to the inside
of the server by removing the top cover of the chassis. Proceed to the "DVD-ROM
Installation" section later in this chapter for instructions.
For installing/removing a component in the 5.25" drive bay, proceed to the "5.25"
Drive Bay Installation" section later in this chapter for instructions.
If the system is already powered on, the fan will activate immediately upon 4.
being connected to its header on the motherboard.