Supero SUPERSERVER 6026T-TF, Руководство пользователя

Страница: 24 / 106

2-10
S
UPER
S
ERVER 6026T-TF Manual
2-6 Checking the Drive Bay Setup
Next, you should check to make sure the peripheral drives and the SATA drives
have been properly installed and all connections have been made.
Checking the Drives
All drives are accessable from the front of the server. For servicing the DVD- 1.
ROM, you will need to remove the top chassis cover. The hard drives can be
installed and removed from the front of the chassis without removing the top
chassis cover.
A slim DVD-ROM may be preinstalled in your server. Refer to Chapter 6 if 2.
you need to install a DVD-ROM drive to the system.
Depending upon your system's confi guration, your system may have one or 3.
more drives already installed. If you need to install hard drives, please refer to
Chapter 6.
Checking the Airfl ow
Airfl ow is provided by four hot-swappable 8-cm chassis cooling fans. The 1.
system component layout was carefully designed to direct suffi cient cooling
airfl ow to the components that generate the most heat.
Note that all power and data cables have been routed in such a way that they 2.
do not block the airfl ow generated by the fans.
Providing Power
Plug the power cord(s) from the power supply unit(s) into a high-quality power 1.
strip that offers protection from electrical noise and power surges. It is recom-
mended that you use an uninterruptible power supply (UPS).
Depress the power on button on the front of the chassis. 2.