Supero SUPERSERVER 6023P-8, Руководство пользователя

Страница: 20 / 104

2-4
S
UPER
S
ERVER 6023P-8R/6023P-8 Manual
Installing the Chassis Rails:
Position one of the fixed chassis rail sections you just removed along the
side of the 6023P-8R/6023P-8. Note that these two rails are left/right
specific. Slide the rail toward the front of the chassis (see arrows in
Figure 2-2) until you hear them click into place with the retention hooks
on the chassis. The screw holes should now be aligned - screw the rail
securely to the side of the chassis (see Figure 2-2). Repeat this
procedure for the other rail on the other side of the chassis. You will
also need to attach the rail brackets when installng into a telco rack.
Locking Tabs: As you have seen, both chassis rails have a locking tab,
which serves two functions. The first is to lock the server into place
when installed and pushed fully into the rack, which is its normal position.
Secondly, these tabs also lock the server in place when fully extended
from the rack. This prevents the server from coming completely out of
the rack when you pull it out for servicing.
Figure 2-2. Installing Chassis Rails
Installing the Rack Rails:
Determine where you want to place the SuperServer 6023P-8R/6023P-8 in
the rack. (See Rack and Server Precautions in Section 2-3.) Position the
fixed rack rail/sliding rail guide assemblies at the desired location in the
rack, keeping the sliding rail guide facing the inside of the rack. Screw the
assembly securely to the rack using the brackets provided. Attach the