Supero SUPERSERVER 6017R-TDF, Руководство пользователя

Страница: 48 / 106

5-16
S
UPER
S
ERVER 6017R-TDF User's Manual
Chassis Intrusion
A Chassis Intrusion header is located at
JL1 on the serverboard. Attach the ap-
propriate cable from the chassis to inform
you of a chassis intrusion when the chas-
sis is opened.
Chassis Intrusion
Pin Defi nitions
Pin# Defi nition
1 Intrusion Input
2 Ground
Ethernet Ports
Two Ethernet ports (LAN1/LAN2) are
located next to the VGA port on the I/O
back panel. An IPMI Dedicated LAN port
is also located above the USB0/1 ports.
This provides a dedicated network con-
nection for IPMI 2.0 support. These ports
accept RJ45 type connectors/cables.
LAN Port
Pin Defi nitions
Pin# Defi nition
1 GND 9 TD0+
2 Vcc19-LAN 10 TD0
3 TD3+ 11 Link 100 LED
4 TD3- 12 Link 100 LED
5 TD2+- 13 3.3V
6 TD2- 14 Act LED
7 TD1+- 15 GND
8 TD1- 16 GND
Unit Identifi er Switch/UID LED
Indicators
A Unit Identifi er (UID) switch and two
LED indicators are provided on the
serverboard. The UID switch is located
next to the VGA port on the backplane.
The rear UID LED (LED3) is located next
to the UID switch. The Control Panel
UID LED is located on pins 7/8 of JF1.
Connect a cable to pin 8 on JF1 for the
UID LED on the control panel. When you
press the UID switch, both the rear front
Panel UID LED indicators will turn on.
Press the UID switch again to turn off
both LED indicators. These UID indicators
provide easy identifi cation of a system
unit that may be in need of service.
Note: UID can also be triggered via IPMI
on the serverboard. For more information
on IPMI, please refer to the IPMI User's
Guide posted on our website @http://
www.supermicro.com.
UID Switch
Pin# Defi nition
1 Ground
2 Ground
3 Button In
4 Ground
UID LED (LED3)
Status
Color/State Status
Blue: On Unit Identifi ed